Can you replace a sliding glass door with French doors?

In most cases, yes. The rough opening dimensions are usually compatible. We verify header load capacity and framing during the site evaluation. Minor framing adjustments are common and included in our scope.

How much does it cost to replace a sliding glass door?

Installed pricing for a standard two-panel sliding door typically ranges from $1,500 to $4,000 depending on frame material, glass options, and opening size. Multi-slide and custom configurations run higher. We quote after measuring.

Why is my sliding glass door hard to open?

Not always. Worn rollers, a dirty track, or a misaligned frame can often be repaired for a fraction of replacement cost. We evaluate the unit first and recommend repair when it makes sense.

How do you handle the heavy rain in Crescent City for window installations?

We schedule installations during dry weather windows when possible, but we also use temporary weatherproofing to protect openings during the swap. Proper flashing and sealant application are critical in this climate, and we allow extra time for these details on every Crescent City project.

Do you serve Smith River and Klamath?

Yes. Both Smith River and Klamath are part of our Del Norte County service area. We schedule work in these communities on the same trips as Crescent City projects.

What windows hold up best in Crescent City's wet climate?

Vinyl and fiberglass frames perform best here because they are impervious to moisture and will not rot or corrode. We pair them with high-quality weatherstripping and specify proper flashing systems that integrate with the building's drainage plane. Seal longevity is a top priority in product selection for this area.

Sliding Glass Doors & French Doors in Crescent City, CA

Smooth-operating patio, sliding, and French door systems.

Licensed & Insured25+ Years Experience5-Star Rated

Call 530-545-1385 View Our Services

Request a Free Estimate

Licensed

Licensed & Insured

25+

Years Experience

Quality

Guaranteed Work

Local

Family Owned

Upgrade access, light, and security with precision-installed door systems built for daily use. Colfax Glass proudly serves Crescent City, CA with professional glass and window solutions backed by local expertise.

Why Choose Sliding Glass Doors & French Doors in Crescent City, CA

New installs and replacement of aging sliders
Hardware, track, and alignment tuning
Improved thermal and weather performance
Multiple finish, glass, and configuration options

Sliding Glass Doors & French Doors — What to Expect

A sliding glass door or French door is the most-used transition point between indoor and outdoor space. When the rollers wear out, the track bends, or the seal fails, you feel it immediately: drafts, noise, sticking panels, and visible condensation between panes. Replacing an aging slider restores comfort, security, and ease of use in one project.

Colfax Glass installs sliding and French door systems from Milgard and JELD-WEN. We carry two-panel, three-panel, and multi-slide configurations in vinyl, fiberglass, and aluminum-clad frames. For Sacramento and Roseville homes with large patio openings, multi-slide doors create a wide indoor-outdoor connection without the bulk of a traditional slider. For Brookings and Crescent City homes exposed to coastal wind, we recommend impact-rated glass and corrosion-resistant hardware that holds up to salt air over the long term.

Proper installation matters as much as the product. A door that is not level or plumb will bind, drag, and wear out its rollers prematurely. We shim and fasten the frame to the rough opening with precision, then adjust the roller height and track alignment so the panels glide without resistance. Weatherstripping and threshold seals are set to block drafts and water intrusion.

We also repair existing sliding doors when replacement is not necessary. Track reconditioning, roller replacement, handle and lock upgrades, and re-glazing of fogged panels are all services we perform regularly for clients in Auburn, Colfax, Grass Valley, Loomis, and Rocklin.

Sliding Glass Doors & French Doors for Crescent City, CA Homes

Crescent City is the county seat of Del Norte County, located on the Northern California coast just south of the Oregon border. The town sits in one of the wettest regions in California, with annual rainfall frequently exceeding 70 inches. Combined with salt air exposure and occasional tsunami risk in the low-lying areas near the harbor, windows and doors here face conditions that would be unusual anywhere else in our service territory.

The housing stock in Crescent City is primarily single-family homes, many built between the 1960s and 1980s. After the 1964 tsunami devastated the town's waterfront, much of the lower downtown was rebuilt with commercial and residential structures designed for that era's standards. These buildings often have original glazing that is past due for replacement. Moisture intrusion, seal failure, and frame deterioration from persistent rain and humidity are the most common issues we encounter.

Colfax Glass serves Crescent City on a scheduled rotation, similar to our Brookings coverage. We also reach Smith River to the north and Klamath to the south. For Crescent City projects, we emphasize moisture management: proper flashing, drainage-plane compatibility, and frame materials that resist rot and corrosion. Product selection here is driven by durability and weather resistance above all other factors.

How Sliding Glass Doors & French Doors Works

1
Site Evaluation
We assess the existing opening, track condition, framing, and structural header to determine whether a direct replacement or a modified opening is needed.
2
Design & Configuration
Choose between sliding, multi-slide, or French door configurations. We help you select frame finish, glass type, hardware, and screen options that match your home and daily use.
3
Order & Lead Time
Custom door orders typically run 4-8 weeks. We confirm dimensions and specifications before placing the order to avoid field issues on install day.
4
Installation
Our crew removes the old unit, prepares the rough opening, sets the new door system, and adjusts rollers, tracks, and locks for smooth daily operation.
5
Operation Check & Cleanup
We test sliding action, locking mechanisms, and screen fit. We review care instructions for the track and hardware before completing the job.
6
Warranty & Ongoing Care
Your door system is covered by manufacturer and workmanship warranties. We're here for roller adjustments, track maintenance, and any questions down the road.

Top Brands We Install

“Rain is a fact of life in Crescent City and our old windows were leaking badly every winter. The new windows from Colfax Glass are tight, dry, and the installation quality was clearly a step above what we expected.”
Homeowner, Crescent City